Connect with us

Tutorials

Cricket 19 Tips and Tricks: Become a Pro at the Game

Published

on

Cricket 19 Tips and Tricks Become a Pro at the Game

Cricket 19 is the latest and most advanced cricket game developed by Big Ant Studios. With licensed teams and players, improved graphics, new controls and innovative game modes, it provides an authentic cricketing experience like never before. However, mastering the game takes time and practice. This article provides key tips and tricks to help you become a pro at Cricket 19.

Key Takeaways:

  • Master the batting controls and learn to time your shots
  • Use custom difficulty settings to find your comfort zone
  • Bowl to your bowler’s strengths and set the field accordingly
  • Read the pitch and adapt your batting/bowling approach
  • Play scenarios and career mode to hone your skills against tough opponents
  • Make good use of training modes to build your player’s attributes

Cricket 19 can seem daunting to new players due to its expansive shot controls and nuanced bowling system. But you can significantly improve your game by focusing on a few key aspects:

Get the Basics Right

  • Take your time to get familiar with the various batting shots, bowling variations and fielding controls. Don’t rush to play high-level matches.
  • Start on lower difficulty settings and then increase as you get better. Use custom difficulty to fine-tune.
  • Master the timing for batting shots and work on your reflexes. Read the length early and premeditate your shots.
  • When bowling, focus on line and length consistency. Don’t always try to take wickets. Building pressure is key.

Batting Tips and Controls

  • Use the left stick to move around the crease and shuffle to reach the pitch of the ball.
  • For front-foot shots, press L1 + shot button. For backfoot shots, hold R1 + shot button.
  • To hit aerial shots, press X (aggressive), △ (defensive) or O (orthodox). The longer you press, the higher it goes.
  • Defensive shots are safer early in your innings. Later you can try more aggressive controlled shots.
  • Flick L3 during the bowler’s run up to see the batsman’s strengths. Target his weaker zones.
  • Take quick singles by nudging the ball and then quickly pressing L1 + R3. Call your partner with ▢.

Bowling Tips and Controls

  • Check the batsman’s weakness by pressing L3 while bowling. Try to repeatedly target that zone.
  • Bowl to your bowler’s strengths. Keep an inswinger specialist on one side and outswinger specialist on the other.
  • Change your bowler’s pace often. Bowl different variations like yorkers, bouncers, cutters etc. randomly.
  • Try to build pressure by drying up runs and inducing false shots. Wickets will come automatically.
  • To bowl yorkers, release the ball from your hand later by holding the button slightly longer.

Master Game Modes

Scenarios – Start here to face tough match situations and unlock challenges.

Career Mode – Create your player and take him from rookie to pro. Monitor fitness, train skills.

World Cups – Test your mettle by playing the official ICC World Cups or Ashes series.

YouTube player

Additional Tips

  • Use training modes to improve your player’s skills like batting, bowling, fielding, running between wickets etc.
  • To catch high balls, use R3 to position and ▢ to complete the catch, while watching the ball into your hands.
  • Study your opponent’s weaknesses during the game and target those zones.
  • Make sure to rotate strike while batting. Don’t let one partner dominate and get stuck.

Frequently Asked Questions

How do I play shots in Cricket 19?

  • Use the left stick to move in the crease, then press the corresponding face button for the shot: ▢ (straight), O (front foot off side), ∆ (back foot off side), X (front foot leg side), □ (back foot leg side).
  • For aerial shots, hold L1 + shot button. For aggressive shots, hold X while pressing shot button.
  • Timing is key. Watch the ball closely and press the button just before it would hit the bat. Don’t pre-press.

How to bowl in Cricket 19?

  • During run up, move right stick down then quickly up to achieve optimum speed.
  • For line, move stick left or right when the bowler releases the ball. Time it well.
  • For length, release the right stick earlier or later. Earliest – yorker, late – bouncer, in between – good length.
  • Press R1 while releasing to bowl slower balls. Press L1 for wider line.
  • Target the batsman’s weaker zones (shown by pressing L3). Keep varying your pace and line.

How to get batting practice in Cricket 19?

  • Use the Batting and Bowling practice modes. Start with low difficulty and then increase gradually.
  • Face different types of bowlers in practice – spin, fast, swing etc. and play appropriate shots.
  • Enable batting tips in Settings. This will guide you on the best shot selection during matches.
  • Play short scenarios of 10-15 overs to get match practice. Don’t start with full ODIs initially.

How to take wickets in Cricket 19?

  • Bowl line and length consistently around off stump channel to build pressure and induce false shots.
  • Use your bowler’s optimal line and length displayed when you press L3 while bowling.
  • Make the batsman play as many deliveries as possible. Dot balls create wickets.
  • Keep varying your pace, line and length. Bowl different variations like inswingers, outswingers, bouncers, yorkers, cutters randomly.
  • Set attacking fields for new batsmen. Have close-in fielders and give the ball more air.

Conclusion

Cricket 19 provides an engrossing, true-to-life cricket experience for both casual and serious gamers. With so many controls and game modes, it can seem intimidating at first. But by focusing on the basics, and then slowly graduating to advanced moves, you can steadily improve your skills.

Practice the key batting shots, bowling variations and fielding moves till they become second nature. Master the game modes one by one to get used to the mechanics against tough opponents. Set the difficulty level appropriately so you are always challenged without being overwhelmed. Make use of the practice and training modes to build up your attributes. Follow these tips, and with a dash of patience, you will be on your way to becoming a Cricket 19 pro!

I'm a gamer since 2006. I like to play games everyday. so I decided to make a website helpful for other gamers. that's my website for them Gamesreq.com

Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Tutorials

[SLOVED] How To FIX Epic Games Launcher Setup Wizard Ended Prematurely

Published

on

[SLOVED] How To FIX Epic Games Launcher Setup Wizard Ended Prematurely

How to Fix Epic Games Launcher Setup Wizard Ended Prematurely

Are you stuck with the annoying “Setup Wizard Ended Prematurely” error while installing the Epic Games Launcher? Don’t worry—you’re not alone, and the good news is, there’s a straightforward fix. In this guide, I’ll explain why this happens and show you how to fix it step by step. By the end of this article, you’ll have your Epic Games Launcher installed and ready to go.

Key Takeaways

Fix Epic Games Launcher Setup Wizard Ended Prematurely

Why Does “Setup Wizard Ended Prematurely” Happen?

This error occurs when the installation process gets interrupted or cannot complete. Common causes include:

Understanding the cause helps you apply the right fix.


How to Fix the “Setup Wizard Ended Prematurely” Error

Here are several methods to solve this problem. Follow the steps in order for the best results.

Install Epic Games Launcher from the Microsoft Store

How to Fix Epic Games Launcher Setup Wizard Ended Prematurely

This is the most reliable method to fix the error. The Microsoft Store ensures that the files are clean and compatible with your system.

  1. Open Microsoft Store by pressing the Windows key, typing “Microsoft Store,” and hitting Enter.
  2. Search for Epic Games Launcher in the search bar.
  3. Click the “Get” or “Install” button and wait for the installation to complete.
  4. Once installed, open the launcher, sign in, and start gaming!

Perform a Clean Installation (Alternative Method)

If you prefer not to use the Microsoft Store, you can try this manual approach.

  1. Uninstall Previous Attempts:
    • Go to Control Panel > Programs > Uninstall a Program.
    • Find the Epic Games Launcher, right-click, and select Uninstall.
  2. Delete Leftover Files:
    • Open File Explorer and navigate to C:\Program Files (x86)\Epic Games.
    • Delete the folder if it exists.
  3. Clear Temporary Files:
    • Press Win + R, type %temp%, and delete all temporary files.
  4. Download the Installer Again:
  5. Run as Administrator:
    • Right-click the installer and select Run as Administrator to ensure proper permissions.

Check System Requirements and Updates

An outdated system can cause unexpected errors. Here’s how to ensure your system is ready:

  1. Update Windows:
    • Go to Settings > Update & Security > Windows Update.
    • Click Check for Updates and install any available updates.
  2. Check Compatibility:

Disable Antivirus or Firewall Temporarily

Sometimes, your antivirus or firewall blocks the installation process. Temporarily disable these protections while installing:

  1. Open your antivirus program or Windows Security.
  2. Turn off Real-Time Protection or temporarily disable the firewall.
  3. Re-enable these settings after the installation completes.

Why Installing via Microsoft Store Is the Best Option

The Microsoft Store simplifies everything. It:

  • Ensures clean and verified files.
  • Automatically manages system compatibility.
  • Avoids software conflicts by streamlining the process.

If you’re tired of dealing with installation headaches, this method is the way to go.


Preventing Future Issues

Here are some tips to avoid similar problems in the future:


FAQs

Why does the Epic Games Launcher setup fail?

The setup often fails due to corrupted files, outdated system software, or permissions issues. Antivirus or firewalls may also block the installation.

Can I fix this error without using the Microsoft Store?

Yes, you can perform a clean installation by uninstalling previous attempts, clearing leftover files, and downloading the launcher directly from Epic Games’ official site.

Does reinstalling Windows solve this problem?

Reinstalling Windows should be a last resort. Try the methods above first; they’re simpler and usually effective.


Conclusion

The “Setup Wizard Ended Prematurely” error is frustrating, but it’s easy to fix when you know what to do. Installing the Epic Games Launcher from the Microsoft Store is the quickest and most reliable solution. If that doesn’t work, a clean installation or checking for system updates should do the trick.

Got your launcher working? Awesome! Share this guide with your friends who might face the same issue. Happy gaming!

Continue Reading

Tutorials

How to Fix PS5 Black Screen Issue When Switching to 4K: Troubleshooting Guide

Published

on

How to Fix PS5 Black Screen Issue When Switching to 4K

If you’re a PS5 user, you know how much better games look in 4K. But if your screen goes black every time you switch to 4K output, it’s a massive frustration. Many PS5 users experience a random black screen when setting their console to 4K resolution. Usually, this happens due to a few common issues with the HDMI cable, display device, or specific PS5 settings.

In this guide, I’ll take you through step-by-step solutions to get your PS5 back in working order at 4K resolution. Let’s dive in and find out what you need to do to fix this issue.


Key Takeaways

  • Check HDMI Cable: Use a high-speed HDMI 2.1 cable for stable 4K output.
  • Update Firmware: Ensure both PS5 and TV firmware are up-to-date.
  • Adjust Video Output Settings: Lower resolution temporarily, then retry 4K.
  • Modify HDR and HDCP Settings: Switching off HDCP or adjusting HDR may solve display issues.

1. What Causes the Black Screen on PS5 When Switching to 4K?

The PS5 black screen issue when switching to 4K can stem from a few typical problems:

  • HDMI Cable or Port Issues: Not all HDMI cables or ports support 4K. For stable output, you’ll need a high-speed HDMI 2.1 cable and compatible ports on your TV.
image 58

2. Step-by-Step Troubleshooting Guide for the PS5 Black Screen Issue

To fix the black screen issue, let’s go through the most effective steps one by one.

Step 1: Restart the PS5 in Safe Mode and Lower the Resolution

  1. Power Off the PS5 – Hold down the power button until you hear a second beep (about 7 seconds).
  2. Boot into Safe Mode – Press and hold the power button again until the PS5 starts in Safe Mode.
  3. Select Change Video Output – In Safe Mode, go to “Change Video Output” and select “Change Resolution.”
  4. Lower the Resolution – Set the resolution to 1080p temporarily.

Switching to a lower resolution will help you access the system and adjust settings that could prevent the black screen. Once you’re back in the console, you can gradually increase the resolution to test if 4K can work without causing issues.

Step 2: Check and Upgrade Your HDMI Cable

For 4K output, the HDMI cable is a vital link. Not all HDMI cables support 4K, so check that you’re using an HDMI 2.1 cable specifically designed for high-speed, high-quality video. Here’s how to test it:

  1. Use a New HDMI 2.1 Cable – Make sure the HDMI cable is labeled as 2.1, which is the recommended standard for 4K gaming.
  2. Try Different HDMI Ports – Some TVs only support 4K on specific ports. Switch to another port and see if the black screen disappears.

If the problem goes away with a new HDMI cable or port, then it’s safe to say the issue is with your original cable or the port.

Step 3: Update Firmware on PS5 and TV

  1. Update PS5 System Software – Go to Settings > System > System Software > System Software Update and Settings. Follow the prompts to ensure your PS5 software is current.
  2. Update TV Firmware – Some smart TVs have firmware updates that improve compatibility with gaming consoles. Check your TV’s settings menu or refer to the manufacturer’s website for instructions.

Keeping your firmware up-to-date prevents known bugs from causing display issues and ensures better compatibility between devices.

Step 4: Adjust PS5 Video Output Settings

In your PS5 settings, you have several options under Video Output to help fix the black screen issue.

  1. Change the Resolution – Go to Settings > Screen and Video > Video Output > Resolution. Try switching between 1080p, 2160p (4K), and Automatic to see which one works best.
  2. Set 4K to 60Hz or 120Hz – Some displays struggle with higher frame rates at 4K, so try limiting the refresh rate to 60Hz or 120Hz.
  3. Disable VRR (Variable Refresh Rate) – VRR can sometimes cause screen issues on displays that don’t support it well. Go to Settings > Screen and Video > VRR and toggle it off.
image 59

Step 5: Turn Off HDCP and Adjust HDR Settings

High-bandwidth Digital Content Protection (HDCP) can sometimes interfere with display output on certain TVs. Turning it off may help.

  1. Turn Off HDCP – Go to Settings > System > HDMI > Enable HDCP and turn this setting off.
  2. Modify HDR Settings – You can either enable or disable HDR to see if it affects the screen. Find this option in Settings > Screen and Video > HDR and test with it on and off.

Both HDCP and HDR settings can impact the video output on your PS5, so experimenting with these settings can reveal if they’re causing the black screen.


3. When to Seek Additional Support

If you’ve tried all these steps and your PS5 still shows a black screen at 4K, there could be a deeper issue with either the console or the display. Here’s what you can do next:

  • Contact Sony Support – Sony may be able to provide more specialized guidance or repairs if needed.
  • Check Your Display Device – If possible, try connecting your PS5 to a different 4K display to see if the problem persists. This will help confirm if the issue is with your console or your display device.

Conclusion

Fixing the PS5 black screen when switching to 4K can be a little tricky, but following these troubleshooting steps will solve the issue in most cases. Start with the basics like changing the resolution in Safe Mode, then work through the HDMI and firmware checks before adjusting video settings.

Remember, 4K gaming requires the right setup—cables, compatible displays, and updated firmware—to run smoothly. Hopefully, this guide has helped you get your PS5 back in action at 4K, delivering the incredible visual experience it’s designed for.


FAQs

1. Why does my PS5 show a black screen when I switch to 4K?

The black screen can happen due to HDMI cable limitations, compatibility settings on your display, or firmware issues.

2. Can I use any HDMI cable for 4K on my PS5?

No, you need an HDMI 2.1 cable for stable 4K output. Using an older HDMI cable might not support the high bandwidth needed for 4K gaming.

3. Should I turn off HDR to fix the black screen issue on my PS5?

Disabling HDR can sometimes resolve the black screen issue, especially if your display struggles with HDR settings. Test this to see if it helps.

4. What is HDCP, and should I disable it on my PS5?

HDCP (High-bandwidth Digital Content Protection) is a feature to prevent unauthorized copying of digital content. Some displays don’t support it well, so disabling it can sometimes fix the black screen issue.

5. Can outdated firmware cause black screen issues?

Yes, outdated firmware on your PS5 or display can create compatibility issues with 4K. Always check for updates to ensure smooth performance.


Hopefully, this guide helps you troubleshoot your PS5 black screen issue with 4K output, getting you back to your gaming in stunning quality. Remember, if you keep experiencing issues, reaching out to Sony Support or your display’s manufacturer may be the best next step.

Continue Reading

Tutorials

How to Fix Rusty PS5 Fan Covers and Protect Your Console from Damage

Published

on

How to Fix Rusty PS5 Fan Covers and Protect Your Console from Damage

If your PS5’s fan covers are starting to rust, you’re not alone. Rust can cause serious issues, from clogging up airflow to putting your console at risk of overheating. But don’t worry—this guide has everything you need to remove rust and prevent it from coming back.


Key Takeaways

  • Rust on PS5 fan covers can restrict airflow, causing your console to overheat.
  • Cleaning off the rust is essential to keep your PS5 running smoothly.
  • You can remove rust with simple tools and cleaning products.
  • Proper storage and maintenance can help prevent rust from forming again.

Short Answer

Yes, rust on your PS5 fan covers can lead to overheating and long-term damage if left untreated. This guide will show you how to clean off the rust safely and keep your PS5 rust-free.


Why Do PS5 Fan Covers Rust?

Rust is common when metal is exposed to moisture, and PS5 fan covers aren’t immune. Here are the main causes:

  1. Humidity: High humidity levels, especially in coastal or rainy areas, can speed up rust formation on metal.
  2. Storage and Environment: Keeping your PS5 in a damp or poorly ventilated room can lead to moisture buildup, encouraging rust.
  3. Dust and Debris: Dust can trap moisture and hold it against the metal, accelerating rust.
image 54

Can Rust on Fan Covers Damage Your PS5?

Yes, rust can be damaging if it’s not taken care of. Here’s how rust can impact your PS5:

  • Reduced Airflow: Rust can clog the fan cover, restricting airflow and making it hard for your PS5 to cool down.
  • Overheating Risks: With reduced airflow, your PS5 can get hotter, leading to performance issues or even hardware damage.
  • Fan Efficiency: Rust can also impact the efficiency of the fan, causing it to work harder and potentially wear out faster.

Leaving rust unchecked might not cause immediate problems, but over time, it can shorten the lifespan of your PS5. So let’s look at how to get rid of it.

image 55

How to Safely Remove Rust from Your PS5 Fan Covers

Removing rust from your PS5 fan covers doesn’t have to be complicated. Just follow these steps carefully to clean it up without damaging your console.

Materials Needed

  • Soft brush
  • Isopropyl alcohol (preferably 70% or higher)
  • Fine-grit sandpaper (around 400-600 grit)
  • Rust remover solution (optional)
  • Microfiber cloth

Step-by-Step Guide

  1. Turn Off and Unplug Your PS5
    Safety first. Make sure your PS5 is fully powered down and unplugged to avoid any risk of electrical damage.
  2. Remove the Side Panels
    Gently pull up and slide the PS5 side panels to reveal the fan area. This will give you access to the fan covers.
  3. Brush Off Dust
    Use a soft brush to remove dust and loose debris. This is especially important since dust can hold moisture, which leads to rust.
  4. Clean with Isopropyl Alcohol
    Dampen a microfiber cloth with isopropyl alcohol and wipe down the fan covers. Alcohol evaporates quickly and won’t leave moisture behind.
image 56
  1. Use Sandpaper for Rust Spots
    Take a piece of fine-grit sandpaper and gently scrub away any rust spots on the fan covers. Be careful to only sand the rusted areas, as you don’t want to scratch the surface too much.
  2. Apply Rust Remover (Optional)
    For stubborn rust, you can apply a small amount of rust remover on a cloth and gently rub it onto the affected areas. Be sure to follow the product’s instructions.
  3. Reassemble Your PS5
    Once the rust is removed, carefully reattach the side panels. Plug your console back in and turn it on to make sure everything’s working fine.

How to Prevent Rust on PS5 Fan Covers in the Future

Now that your PS5 fan covers are rust-free, it’s a good idea to keep them that way. Here’s how you can prevent rust from forming again:

1. Keep Your PS5 in a Dry Place

  • Avoid placing your console in areas with high humidity or near windows where it might be exposed to moisture. A well-ventilated, dry room is ideal.

2. Use a Dehumidifier

  • If you live in a humid environment, consider using a dehumidifier in the room where you keep your PS5. This will reduce moisture levels and help prevent rust.

3. Add Silica Gel Packs

  • Place a couple of silica gel packs near your PS5 or within the console’s storage area. Silica absorbs moisture and can help keep the surroundings dry.

4. Clean Regularly

  • A quick wipe-down once a month can make a big difference. Use a soft cloth to remove any dust buildup, which can trap moisture and lead to rust over time.

5. Consider a Protective Coating

  • Applying a very light anti-rust spray designed for electronics (make sure it’s safe!) can help protect the metal components from future rusting.
image 57

FAQ

Q: Can I use water to clean rust from my PS5 fan covers?
No, avoid using water. Use isopropyl alcohol instead since it evaporates quickly and won’t leave moisture behind.

Q: What if the rust keeps coming back?
If rust reappears, it could mean your storage area is too humid. Consider moving your PS5 to a dryer area or adding a dehumidifier.

Q: Is it safe to open my PS5 to clean the fan covers?
Yes, removing the side panels is generally safe and won’t void your warranty. Just make sure your console is turned off and unplugged.

Q: Do I need to buy a new fan cover if there’s too much rust?
If the rust is severe and hard to remove, you might want to look into a replacement part. Check with Sony or an authorized repair center for assistance.


Conclusion

Rust on your PS5’s fan covers is more than just a cosmetic issue. If left untreated, it can impact airflow, increase the risk of overheating, and shorten your console’s lifespan. Luckily, with the right tools and techniques, you can remove rust safely and prevent it from coming back.

By following the steps in this guide, you’ll keep your PS5 running smoothly and ensure it stays rust-free for longer. Regular maintenance, proper storage, and a dry environment are key to avoiding rust and keeping your console in top condition.

Continue Reading

Trending